ALKANET OIL Stage two - For giving Walnut stocks a greater depth of colour and enhancing the figure and

graining within the wood.

Instructions for use: If the stock already has a finish it will be necessary to remove this to enable the oil to penetrate

into the wood. As in stage one, 400 wet/dry paper with a little oil should remove most oil finishes, however if the

stock has a very thick lacquer on it, you may need a lacquer remover. Application - using a brush or rag, apply the oil

to the stock and forend quite liberally covering the whole surface including the chequering. A new stock will absorb

more oil than an old one, each stock will differ in the amount of colour and contrast. Allow the oil to penetrate then

repeat the oiling process until the depth of colour that you require has been reached. When you are satisfied with the

colour of your stock you may now proceed to stage three.

Product Code: BA2170