3 RAPID OIL Stage three - A very special blend of oils, waxes and other Trade Secrets to enable you to obtain that

unmistakable English oil finish. Suitable for new stocks or improving existing ones.

Instructions for use: Shake the bottle well before use, apply a small amount of Rapid Oil to the stock spreading it

over the surface avoiding the chequering. Allow to stand for approximately 2 or 3 hours, during this time some of the

oils will penetrate below the surface, the remainder will have become tacky on the surface. At this point take a piece of

cloth and remove almost all the surplus oil, then with the palm of your hand or a clean doth, buff the oil vigorously

into the stock creating heat. This is the first step in building up a surface sheen, allow the stock to harden overnight,

preferably in a warm dry atmosphere, then simply repeat the oiling and palming. You will find that with each

application of Rapid Oil in the surface build up of oil will steadily improve. When the stock is to your liking allow it

to thoroughly harden before use in the field.

Unfinished stocks, apply Rapid Oil directly to the surface.

Existing stocks already oiled, should first have the surface lightly cut back with very fine steel wool or wet/dry paper.

CAUTION: When using Rapid Oil be ware of the temperature, the higher the temperature the faster the oil will dry.

If by accident the oil is forgotten and is allowed to dry out it will be very uneven, if this should happen remove the oil

with methylated spirit.

Product Code: BA2165